PRIX SVC - Finalist 2014 Ostschweiz

Ether substitute

Description
structure low-viscosity
colour translucent and colourless to slightly yellowish liquid
Benzene content <0.040%
Boiling range 55-100°C
Water content <0.05%
Low-volatility HCs <10ppm
More information

Ether substitute is suitable for degreasing and cleaning a variety of materials such as: metals, mineral glass and plastics (thermosetting plastics, thermoplastics, elastomers) In all cases, pre-tests are required for organic coated parts and plastic parts. Elastomers on a silicone or EPDM base swell under the influence of ether substitute.

   

Aceton

Description
Appearance: clear, colourless
Acidity, expressed as acetic acid: max. 15mg/L
Density (20°C): max.791 kg/m3
Relative density: max.0.793
Ethanol content: min.97.5 min.98.4 %m/m / % vol
Water: max 0.3 %m/m
Methyl ethyl ketone: 1.8-2.2 %m/m
Acetaldehyde + acetal: max.10 ppm V/V
Methanol: max.250 ppm V/V
Benzol: max.1 ppm V/V
Other volatile impurities: max.300 ppm V/V
Vaporisation residue: max.20mg/L
More information

Aceton

   

Isopropylalkohol

Description
Teneur: min. 99.8%
Density/20°C: 0.784-0.79 g/cm³
Teneur en eau: max. 0.1%
Indice de réfraction/20°C: 1.375-1.379
More information

Isopropylalkohol

   

Datasheets

Please fill out the form below and you will receive access to the data sheets.

Further products are available on request